MC Windfeld Ti

Ortofon

The MC Windfeld Ti phono cartridge was introduced in 2017 as a continuous tribute to Ortofon’s former engineer Mr. Windfeld and optimization of the MC Windfeld model launched in 2008.

At the heart of the MC Windfeld Ti lies Selective Laser Melting technology, apllied for manufacturing of the Ortofon Exclusives Series cartridges.
The use of Titanium in the MC Windfeld Ti has provided a further improvement to the overall rigidity of the structure and the cartridge weight. Obviously, MC Windfeld Ti has gone to the next level by reducing unwanted vibrations and increasing the dynamic capability of the cartridge.

37.499,00 kr.

Tilgængelig på restordre

Kategorier: , ,

Ortofon MC Windfeld Ti

Tekniske Specifikationer

Output voltage at 1000 Hz, 5cm/sec. - 0.2 mV
Channel balance at 1 kHz  -  0.5 dB
Channel separation at 1 kHz  -  25 dB
Channel separation at 15 kHz  -  20 dB
Frequency range at - 3dB  -  10 Hz - 50 kHz
Frequency response  -  20 Hz - 20 kHz +2 dB/- 1 dB
Tracking ability at 315Hz at recommended tracking force  -  90 µm
Compliance, dynamic, lateral  -  13 µm/mN
Stylus type  -  Special polished Nude Ortofon Replicant 100 on Boron Cantilever
Stylus tip radius  -  r/R 5/100 µm
Tracking force range  -  2.0-2.5 g (20-25 mN)
Tracking force, recommended  -  2.3 g (23 mN)
Tracking angle  -  23°
Internal impedance, DC resistance  -  7 Ohm
Recommended load impedance  -   > 10 Ohm
Coil wire material  -  Aucurum
Cartridge body material  -  SLM Titanium and Stainless Steel
Cartridge colour  -  Titanium/Black
Cartridge weight  -  11 g